KEF

Q950

Flagship 2.5-way floorstander With a big bass driver, twin ABRs and Uni-Q driver array the Q950 floorstander can deliver music and cinema in full effect. Pairing KEF's signature Uni-Q midrange and treble driver with a 200mm (8 inches) long-throw bass driver and two matching ABRs brings high resolution sound with extraordinary depth and clarity.

£1,599.00
£1,599.00
900x900 l3 1024x1024
Kef q950 black 1024x1024
Kef q950 white 1024x1024

The Q Series Flagship

Technology

"Sit anywhere" Uni-Q sound

The Uni-Q driver array places the tweeter in the centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever. The result, enhanced by KEF's 'tangerine' waveguide over the tweeter, is a more accurate three-dimensional sound that's dispersed evenly throughout the room.

Tweaking the tweeter

With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.

A word about drums and bass

The Q Series reproduces the nuances of bass instruments with ease. With a larger roll surround and new suspension KEF drivers produce cleaner bass at high volumes.

A new cone structure improves midrange clarity and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension enhances bass quality.

New system design

Putting the Uni-Q driver in its own sealed cabinet reduces the load on the cone and increases clarity and detail while delivering cleaner bass.

Midrange clarity is enhanced by driver improvements that mean the DC blocking capacitor to be eliminated from the crossover, allowing a morenatural roll-off between drivers.

Design
2.5-way bass reflex
Drive Units
200mm (8in.) aluminium Uni-Q
38mm (1.5in.)vented aluminium dome HF
200mm (8in.) aluminium LF
2 x 200mm (8in.)aluminium ABR
Sensitivity
91dB (2.83V/1m)
Frequency Response
44Hz-28kHz (±3dB)
Maximum Output
113dB
Amplifier Requirements
15-200W
Nominal Impedance
8 Ohms (min.3.2 Ohms)
Crossover Frequencies
2.2kHz
Dimension (H x W x D)
1062 x 244 x 328 mm
1116 x 357 x 328 mm (with Plinth)
Weight
20.6kg (45.4 lbs)

Related Products